Circuit Technology Center
 
Section 6.0 Jumper Wire and
Component Modification Procedures


6.1 Jumper Wires
Procedure covers use of jumper wires
including 42 detailed illustrations and photographs.
6.2.1 Jumper Wires, BGA Components, Circuit Track Method
Procedure is used to change a circuit path at a
BGA site for engineering changes or modifications.
6.2.2 Jumper Wires, BGA Components, Through Board Method
Procedure is used to add a jumper at a BGA site by
running the jumper through a hole in the board.
6.3 Component Modifications and Additions
Procedure covers the general guidelines for
modifications that involve adding components.
 
Home · Services · Guidebook · Products · Training · Top

Circuit Technology Center, Inc.