Circuitry and Plated Hole Repair One method for repairing damaged circuitry uses the Foil Jumper Method. This method uses pure copper Circuit tracks. The replaced conductors are the same size as the original. This IPC recommended technique is preferable to making circuitry repairs with jumper wires because it more closely duplicates the original fabrication process. Damaged plated through holes are repaired using eyelets. The experts at Circuit Technology Center have also refined an IPC recommended method for repairing damaged plated holes on multilayer circuit boards that have inner layer connections. Circuitry and Plated Hole Rework Occasionally errors in the circuit board fabrication process occur, or design changes are needed to upgrade circuit boards. Whatever the reason we can help you overcome the modification requirement. Common applications include adding gold edge contacts, rerouting signal connection, isolating via’s and pads or adding an entire component footprints. Refer to the Reference Procedures below for a detailed review of the step-by-step procedures we follow to repair and rework circuit boards. Reference Procedures - Service Charges No. Description First Area Additional Areas 4.1.1 Lifted Conductor Repair, Film Adhesive Method $56.00 $13.50 Each 4.1.2 Lifted Conductor Repair, Film Adhesive Method $56.00 $13.50 Each 4.2.1 Conductor Repair, Foil Jumper, Epoxy Method $56.00 $13.50 Each 4.2.2 Conductor Repair, Foil jumper, Film Adhesive Method $56.00 $13.50 Each 4.2.4 Conductor Repair, Surface Wire Method $56.00 $13.50 Each 4.2.6 Conductor Repair, Inner Layer Method $101.00 See Note 1  4.4.2 Lifted Land Repair, Film Adhesive Method $56.00 $13.50 Each 4.5.1 Land Repair, Epoxy Method $56.00 $13.50 Each 4.5.2 Land Repair, Film Adhesive Method $56.00 $13.50 Each 5.1 Plated Hole Repair, No Inner Layer Connection $56.00 $13.50 Each 5.2 Plated Hole Repair, Double Wall Method $56.00 $13.50 Each 5.3 Plated Hole Repair, Inner Layer Connection $101.00 $75.00 Each Note 1: Pricing may vary depending on extent of damage, number of layers involved in repair, or depth of repair area from surface.   Solutions Across the Board TM Common circuitry and plated hole damage. Circuits repaired using replacement Circuit Tracks and the IPC Foil Jumper repair method. New circuits and pads can be bonded in place for modifications and upgrades.

Home · Services · Guidebook · Products · Training · Top Circuit Technology Center, Inc.