Circuit Technology Center
 
IPC 7711 Soldering Skills Certification Kit

When the experienced soldering operators and technicians on your staff need IPC 7711Soldering Skills Certification, or recertification, you’ll really appreciate how much time and money this kit can save you. Instead of sending employees to classes for two or three days, they work on the projects in this kit at their own pace. There are no deadlines, no pressure, no hassle, no travel or stay-overs. Once the projects are finished, they are returned to Circuit Technology Center for evaluation and grading. Upon acceptance, the Operator who completed the project will receive the official IPC 7711 Soldering Skills Certification for Operators. It’s that simple…and you’ve saved a bundle on travel expenses and time away from work.

Although we offer IPC Certification Courses at our training center, and on-site at customer locations, this Certification Kit uses the Challenge Test provision of the IPC 7711/7721 Rework and Repair Certification Program. As an official IPC Certification Center, we are authorized to allow Operators to take a Challenge Test, without attending live training course. Operators who successfully complete the projects in this Certification Kit will receive the same certification as Operators who attend live training courses.

Operator Experience
This kit contains challenging projects to test an Operator's soldering and rework skills. To expect a passing grade, it is advisable that Operators have a reasonable level of experience, or prior training. A Practice Kit is also available.

Practice Kit
Are your soldering operators ready for certification? The best way to find out is to order our Soldering Skills Practice Kit that let’s them work on actual projects until they develop the expertise they need to be certified. We provide the tools and practice board and you decide when they’re ready for the Certification Kit.

Part No. Description Price
201-4100 IPC 7711 Soldering Skills Certification Kit $399.00
201-4150 IPC 7711 Soldering Skills Practice Kit 79.00
Freight, duties, and value added taxes may increase prices for products outside the US.

Grading
The project grading will be to current IPC-A-610 Acceptability of Electronic Assemblies criteria. Operators select either Class 2, or Class 3 grading. Operators will be graded in 5 sections. Operators may omit sections if certification in those areas is not required by their organization. Operators will receive a Certification only for those sections completed successfully. To receive a successful grade in each section every element of the work must meet or exceed the IPC-A-610 Acceptability of Electronic Assemblies criteria. Only minor blemishes are acceptable. The 5 sections include the following.
  • Through Hole Component Soldering
  • Chip Component Soldering
  • J-Lead Component Soldering
  • Gull Wing Component Soldering
  • Fine Pitch Gull Wing Component Soldering
 
Solutions Across the Board TM


Official IPC Certified

Ordering Information
This Kit may purchased directly
from Distributors and from
Circuit Technology Center.

The IPC 7711 Rework Skills Certification Kit is supplied in an ESD safe case.

Instead of sending employees to classes to get certified, they can become certified at work by completing the IPC 7711 Rework Skills Certification kit. View larger image.
How It Works
  1. Upon receipt of the kit the Operator verifies the contents and reviews the Project Instructions. Included with the kit will be a bare circuit board, a variety of through hole and surface mount components, and an Authorization Form. It is advisable that Operators practice using scrap materials before soldering on the official circuit board. A practice kit containing the exact same materials is available.
  2. The Operator hand solders the supplied components onto the bare circuit board per the instructions supplied with kit. See below.
  3. The Operator places the completed circuit board into the return shipping case.
  4. Both the Operator and a Supervisor sign the Authorization Form confirming that the work was completed by the Operator without assistance. This form also includes a check off to select either IPC-A-610 Acceptability of Electronic Assemblies Class 2 or Class 3 grading criteria. The Authorization Form is also placed inside the return shipping case.
  5. The shipping case is closed and latched and returned to Circuit Technology Center in the return shipping bubble bag provided.
  6. Upon receipt at Circuit Technology Center our Certified Instructors will examine the work and grade it according to the IPC Class 2 or IPC Class 3 criteria selected. An official IPC 7711 Soldering Skills Certification including the Operator name will be mailed to the address listed on the Authorization Form.
Component Soldering Project Instructions
This table lists the quantities, component descriptions, component types, and reference procedures the Operator will follow to complete the project.
Qty Description Component Type Reference Procedures
12 Resistor, 0805 Chip 7.3.1 or 7.3.2
10 Resistor, 1206 Chip 7.3.1 or 7.3.2
6 Capacitor, 1206 Chip 7.3.1 or 7.3.2
5 Capacitor, Tantalum Chip 7.3.1 or 7.3.2
8 MELF Diode, 1206 Chip 7.3.1 or 7.3.2
3 QFP-44, .08mm Pitch Gull Wing 7.5.1, 7.5.2, or 7.5.3
3 QFP-100, 0.5mm Pitch Gull Wing 7.5.1, 7.5.2, or 7.5.3
8 SOIC-14 Gull Wing 7.5.1, 7.5.2, or 7.5.3
6 SOT-23 Gull Wing 7.5.1, 7.5.2, or 7.5.3
3 PLCC-28 J Lead 7.4.1, 7.4.2, or 7.4.3
6 Resistor, 1/4 Watt Through Hole 7.2.1
3 Transistor, TO-5 Through Hole 7.2.1
3 Transistor, TO-18 Through Hole 7.2.1
6 Capacitor, Box, CK 05 Through Hole 7.2.1
3 DIP-14, Narrow Through Hole 7.2.1
 
 
Home · Services · Guidebook · Products · Training · Top

Circuit Technology Center, Inc.